Chainrings

This is a 96mm BCD chainring for a 1X chainring for XTR M9000 crankset with the proven chain retention of our Drop-Stop® chainring. They fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline. - Fits 96 BCD XTR M9000 and M9020 cranksets - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets - Use only the stock Shimano XTR chainring bolts (M7x.75) - You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49 mm for 30-34T and 50 mm for 36T. Provides a great chainline on most boost bikes - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA

Shimano XT CRM80 1x11 Chainrings - Hollow gear construction for optimized rigidity, weight, and rigidity - Durable teeth using plated steel construction supported by a carbon composite (CFRP) carrier body - Dyna-Sys11 HG-X11 11-speed chain compatible - Chainring BCD: 96 Shimano Asymmetric - Color: Black - Drivetrain Speeds: 11 - Material: Steel/Carbon - Ring Position/Type: Chain Retaining Single Ring - Tooth Count: 30

Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner

Shimano's Ultegra 6800 chainrings provide confidence-inspiring shifting and category-defining speed. Cold-forged aluminum comprises these super-stiff, hollow outer rings, and Shimano's unique system of ramps and pins means lightning fast shifts are at your command. - Bolt circle diameter: 4-bolt 110mm asymmetric - 50T pairs with 34T inner ring - 52T pairs with 36T inner ring - 53T pairs with 39T inner ring Inner rings sold separately

Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - New tooth profiles for improved wear - More durable finish - 94mm BCD

Replace worn out chainrings or change out gearing with SRAM's Force X-Glide Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting.

Designed to mount to our MTB Cranksets (KAPIC, KAPIC Carbon, R-Hawk, and MTB 2/INpower) these chainrings are specifically for 1x drivetrains on all-mountain and enduro bikes. It's fully compatible with 9, 10, 11, and 12-speed groupsets, giving you the perfect excuse to ditch your old 2x drivetrain for the efficiency gains and weight savings of a 1x set-up. Wide-narrow teeth mean you won't have to worry about the chain falling off, especially if you choose to ride without a chain guide. This chainring is CNC machined from 7075-T6 aluminum for a simplified design that saves approximately 40 grams compared to the ring, spider, and bolt combo you'd need with a more traditional chainring and crankset. This design also improves overall rigidity for powerful pedaling, as well as giving it slight advantages in the aero department. - 7075-T6 aluminum for optimal strength-to-weight - Direct-mount with Rotor KAPIC, KAPIC Carbon, R-Hawk, R-Raptor cranksets - Semi-aero design improves rigidity and aerodynamics - Wide-narrow teeth for chain retention with 1x set-ups - Compatible with 9, 10, 11, and 12-speed groupsets, as well as our 1x13 groupset - Compatible with SRAM AXS Eagle

• New asymmetrical tooth profiling and more upshift and downshift zones yield instantaneous, smooth and quiet shifting • CNC-machined from super-hard AL-7075 to maximize wear resistance and impact strength • Three times stiffer than Team and Race rings • 3x10 chainrings are compatible with 9-speed drivetrains if a complete set is used

Updated to a new stiffer LT2 5mm big ring, this allowed our engineers to increase the amount of shift features and the type of shift features we could forge into the ring. It also allowed us to use our new fast-engaging forged shift pins to improve shift speed. Holding it together with even better support is our beefed-up LT2 forged X-Spider. LevaTime II is our newest generation of shifting tech. Updated to a new stiffer LT2 5mm big ring, this allowed our engineers to increase the amount of shift features and the type of shift features we could forge into the ring. It also allowed us to use our new fast-engaging forged shift pins to improve shift speed. Holding it together with even better support is our beefed-up LT2 forged X-Spider. All of this adds up to the fastest and most snappy feeling shift we’ve ever produced. We believe so much in our new LevaTime II shifting that we’ve made this aftermarket upgrade kit available to our prior customers. So anyone with an older 3-Bolt Direct Mount Praxis road crank can upgrade immediately. Even if your 3-Bolt Direct Mount Praxis crank is a couple of years old, you can simply order this new full kit and update your crank to LevaTime II shifting. - Designed for Praxis 3-bolt DM road cranks with 10/11/12sp drivetrains - Cold forged 7075-T6 alloy rings mounted to 3-bolt DM spider - LevaTime II: Praxis unique timing and shifting technology. Several shift pins are placed strategically at points on the ring to provide a perfectly timed lift - At this time not compatible with SRAM AXS chain - Unauthorized online sales are prohibited by the manufacturer

Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Chainring can be used with FSA SL-K direct mount outer chainrings - Precision CNC machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - Compatible with Modular crankset (Gossamer/Energy / SL-K / K-FORCE) - Laser-etched logo - Material: Aluminum - Ring Position/Type: Inner - Drivetrain Speeds: 11 - Chainring BCD: 90mm

Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Chainring can be used with FSA SL-K 90 BCD inner chainrings - Precision CNC-machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - Laser-etched logo - Compatible with FSA Modular crankset (Gossamer / Energy / SL-K / K-FORCE) - Drivetrain Compatibility: Shimano 10/11-speed, SRAM 10/11-speed, FSA 11-speed, Campy 10-speed

- CNC machined 6061-T6 alloy - Fits 1-piece and 3-piece BMX cranks - 23.8mm hole for 1-piece cranks with shims for 19/22mm 3-piece cranks included - Hard anodized coating - Unique, 1/8" quiet drive technology - Mount Compatibility: 1-piece/3-piece - Chain Compatibility: 1/2" x 1/8"

Lighter, stronger, and better looking than our original Guiderings; the Guidering SL is intended for use on TRS, LG1, and legacy e*thirteen cranks. The Guidering SL is -8mm offset. This offset will achieve both boost (52mm) and non-boost (49mm) spacing on e*thirteen cranks that feature adjustable chainline (2019 and newer TRS & LG1). On legacy and XCX cranks the Guidering SL will achieve a 49mm non-boost chainline. - Direct Mount chainring for TRS and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Allows both Boost 148mm and non-boost 142mm chainline on adjustable TRS and LG1 cranks SL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings.

UL Chainrings are the lightest 1x XC/Gravel chainrings on the market. Using the SL Chainring as the platform, we tweaked the arm design and strategically machined the chainring so that only minimal sacrifice was made in impact strength for large gains in weight reduction. - Direct Mount chainring for XCX, TRS, and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Provides Boost 148mm chainline on XCX Mountain cranks and 142mm chainlines on XCX Gravel cranks - Provides chainline for Superboost spacing on TRS and LG1 cranks UL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings available soon.

absoluteBLACK Oval 110 BCD 1x Chainrings for gravel greatly improve traction for gravel or road 1x setups. They are designed for all Shimano 5-bolt cranks such as Dura-Ace 7950, Ultegra 6750, Shimano 105 5750, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Provides excellent weight-to-strength ratio - 12-Speed Eagle compatible - Chainring has 1.5mm offset toward frame to provide the perfect chainline - Chainring bolts are included

absoluteBLACK Oval 76 BCD Chainrings greatly improve traction and climbing abilities. They are designed for Rotor REX cranksets with their original 1x spider. Lighter and stiffer than original chainrings, these provide a super-smooth pedaling sensation. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Only compatible with Rotor Rex cranks - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio

Premium Campagnolo compatible Oval chainrings designed for Super Record, Record and Chorus 4-bolt 145/112bcd cranks. They work perfectly with 11 & 12spd drivetrains thanks to our ingenious design. Incredibly stiff and light. Super-fast shifting thanks to our patented shifting ramp design. Same brilliant oval design like in the rest of the collection. Use original bolts. It is the most Premium oval chainring on the market with scientifically proven performance gains. ADVANTAGES OF OUR SPECIAL CAMPAGNOLO COMPATIBLE OVAL CHAINRINGS: - Finest design to provide excellent weight-to-strength ratio - One of a kind special oval shape (Patent Pending) - Superb quality and great look. - You will ride faster using ovals. - You will not "feel" the oval shape at all - Reduces stress on knees - We mastered our oval chainrings to perfection, so you can get best possible advantage from the oval/elliptical shape. - Size (Mass +/-1g): 53T (90g), 39T—(42g) - Compatibility: Campagnolo Super Record, Record, Chorus 4-bolt 145/112bcd for 11 and 12spd versions. - CNC machined 7075 Txxx Aluminum. Long-lasting construction - Ovality: Optimized to each size separately. 39T- 10.4%, 53T—10-11.2% - Timing of 108 -110.5° after TDC (top dead center)—ideal for road climbing

absoluteBLACK Premium Sub-Compact 110 BCD Oval Chainrings are designed to improve your climbing and cadence. They are compatible with all Shimano 110 BCD 4-bolt cranks. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Sub-Compact chainrings only work in predefined size combinations: 46/30 or 48/32 - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - Use Shimano Dura-Ace 11-speed chain or SRAM Eagle 12-speed chain for proper clearance of mounting tabs - Not compatible with SRAM Yaw front derailleurs - 10, 11, and 12-speed compatible

absoluteBLACK Round Direct Mount 1x Chainrings for CINCH allow for flawless boost drivetrain setup. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed)

absoluteBLACK Round Direct Mount 1x Chainrings for SRAM offer flawless drivetrain setup for SRAM 1x9, 1x10, 1x11, and 1x12-speed or single speed. They are designed for SRAM DUB, GXP, and BB30 cranks that have a removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long-Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our patent pending Drop-Stop® technology. These beautifully machined 110 BCD asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX / road / gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. - Fits 110 BCD Asymmetric 4-bolt Shimano cranks - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - Fits 110 BCD asymmetric 4-bolt cranks - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50t are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36t chainring is NOT compatible with these cranks. - NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks - Size 42t and larger will work with the Dura Ace 9100 power meter - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting. - If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention - Chainline 47.5mm - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains

These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed. Drop Stop-B works with all other 9, 10, 11, and 12-spd chains, including SRAM Flattop. Compatibility: - Shimano GRX cranksets including RX600 and RX810 - Drop-Stop ST is designed for Shimano 12-speed Hyperglide+ chains - Drop-Stop B tooth profile is compatible with SRAM Flattop chain - Wolf Tooth’s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains

Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Fits 110 BCD 5 arm cranksets Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 110 BCD 5-arm cranksets. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. - Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Recommendations - Recommend the use of a clutch-style rear derailleur for the best chain security. - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! - Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 34t/44g | 36t/58g | 38t/66g | 40t/74g | 42t/81g | 44t/90g | 46t/107g | 48t/115g | 50t/125g - Material: 7075-T6 aluminum - Made in the USA

120 BCD cranksets were introduced with SRAM 2x10 drivetrains and are excellent candidates for a 1x conversion with our patented Drop-Stop® chainrings. These rings will allow you to convert your 120 BCD crankset, like the SRAM XX and others, to a 1x drivetrain. - Fits 120 BCD cranksets or 4-bolt spiders - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit any 120 BCD crankset or 4-bolt spider. - For SRAM cranksets you must use the stock M10x.75 bolts with a shoulder on them. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings) - SRAM is the only supplier of the M10 x .75 bolts - 36t is the smallest number of teeth that fits on a 120 BCD - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Chainline - 51mm for 36t and 52mm for 38t (38t is wider for more chainstay clearance) - NOT compatible with FSA 4 bolt cranksets Recommendations Before you buy a 120 BCD ring, check to see if your cranksets has a removable spider and compatible with our direct-mount rings. To determine if your spider is removable, see the top two boxes in the decision tree (the 4th picture in the product pictures). If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper along with a clutch-style rear derailleur for the best chain security. Without these precautions, you may experience chain drops and/or chainsuck. Tech Specs: - Weight: 36T/54g | 38T/59g - Material: 7075-T6 aluminum - Made in the USA Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc.

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52t rings. - Fits 130 BCD 5 arm cranksets - Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 130 BCD 5-arm cranksets. - Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features a fifth bolt with 1x specific shoulder. This kit can be found online. - 38T important note: The chain may contact the spider arm slightly when using the 38T chainring (see last photo in the product images). We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for 39T smallest ring. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. Tech Specs: - Weight: 38t/52g | 40t/60g | 42t/62g | 44t/79g | 52t/132g - Material: 7075-T6 aluminum - Made in the USA - This 1x chainring and can be mounted in either the inner or outer ring position of a double crankset but can not be used in a 2x setup. - Chainline - The most common mounting is in the outer ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.

"The perfect solution when you need something smaller than a 30t on your 104/64 BCD cranks or your 11-speed Shimano XT and SLX 96/64 BCD cranks. Also, they look great when paired with our 104 BCD bash ring on a 104/64 BCD crankset - Fits any 104/64 BCD crankset (104 BCD is the middle/big position 64 is the smallest ring position) - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility - Fits any 104/64 BCD crankset (104 BCD is the middle/big position 64 is the smallest ring position) - The Universal Model fits both 104/64 BCD cranksets and the Shimano 11 speed XT M8000 cranks and SLX M7000 cranks. - If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention - Chainline (approximate as BB centering and cranksets vary) - Chainline is 46mm on a triple and 48mm on a double crank - Chainline on a Standard M8000 or M7000 crankset is 48mm and 50mm on a boost version - You will use the stock bolts to mount to this chainring - Use Drop-Stop A for all 9, 10, 11 spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Wihtout these precautions, you may experience chaindrops and/or chainsuck"